hi,
with latest code the endless error loop still occurs:
Stop-Process : Cannot stop process "Idle (0)" because of the following error: Access is denied
At C:\miner\Forager\Include.ps1:128 char:17
+ Stop-Process -InputObject $Process -Force
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (System.Diagnostics.Process (Idle):Process) [Stop-Process], ProcessCommandException
+ FullyQualifiedErrorId : CouldNotStopProcess,Microsoft.PowerShell.Commands.StopProcessCommand
Stop-Process : Cannot stop process "Idle (0)" because of the following error: Access is denied
last useful entries in logfile are
11:03:20.88 Info N-CcminerEnemy-1.12/X17/X17 with Power Limit 0 (id 34-0) for group NVIDIA is the best combination for device group, last was N-SuprMinerSP-4.0a/X16r/X16r with Power Limit 0 (id 84-0) for group NVIDIA
11:03:20.88 Info Killing in 0 sec. N-SuprMinerSP-4.0a/X16r/X16r with Power Limit 0 (id 84-0) for group NVIDIA with system process id 0
this happens after some time during the benchmarking which really takes forever and repeats on each restart since there are so many miners that fail -- most fail right at startup (close immedately after being started), and the script usually catches the failing miner -- but before the endless error loop happens it apparently doesn't detect that the miner process is not running, just sits there with 0% load until the interval ends and then goes into the loop described above.