Update r633e now available:
- New installer uses the new AutoDetection routine (the same one that runs on remote machines). It also uses the new settings code.
- When adding a new machine, default settings are now filled out
- The status screen now only grabs settings information for the current machine
All that is left to do now for full multi-machine support is figure out how to get the miner screen instance to launch on a remote host. I may play with that a bit today, but I expect to have it figured out in a day or two
Something new with failover?
As you see profile 1 CPU fail. And same time in profile 2 is CPU happily hashing with full hashpower.
Smartcoin r633e 23:39:46
----------------------------------------
Host: localhost
GPU[0]: Temp: 71.00 load: 99%
GPU[1]: Temp: 73.00 load: 99%
GPU[2]: Temp: 77.00 load: 99%
GPU[3]: Temp: 70.00 load: 99%
CPU Load Avgs: 6.59 6.63 6.60
Profile: Failover
--------BTCGuild--------
GPU[0]: [103.79 MHash/s] [194 OK] [1 Bad] [.515% Bad]
GPU[1]: [103.74 MHash/s] [199 OK] [4 Bad] [2.010% Bad]
GPU[2]: [103.78 MHash/s] [171 OK] [1 Bad] [.584% Bad]
GPU[3]: [103.79 MHash/s] [215 OK] [1 Bad] [.465% Bad]
CPU: <<>
Total : [415.10 MHash/s] [779 OK] [7 Bad] [.898% Bad]
Failover to: Mt.Red
--------MtRed--------
GPU[0]: [105.89 MHash/s] [185 OK] [3 Bad] [1.621% Bad]
GPU[1]: [103.74 MHash/s] [248 OK] [4 Bad] [1.612% Bad]
GPU[2]: [103.79 MHash/s] [197 OK] [1 Bad] [.507% Bad]
GPU[3]: [103.78 MHash/s] [211 OK] [1 Bad] [.473% Bad]
CPU: [17.6 MHash/s] [33 OK] [0 Bad] [0% Bad]
Total : [434.80 MHash/s] [874 OK] [9 Bad] [1.029% Bad]
Grand Total : [849.90 MHash/s] [1653 OK] [16 Bad] [.967% Bad]
{/code]