https://github.com/RadeonOpenCompute/ROC-smi--setsclk LEVEL [LEVEL ...] Set GPU Clock Frequency Level Mask (manual)
--setmclk LEVEL [LEVEL ...] Set GPU Memory Clock Frequency Mask (manual)
--setfan LEVEL Set GPU Fan Speed Level
--resetfans Reset GPU fans to automatic control
--setperflevel LEVEL Set PowerPlay Performance Level
--setfan 150 (180+ for ref)
--setperflevel MANUAL
--setsclk 5
--setmclk 3
I don't wont setsclk to 5. It is 1401Mhz GPU. I wont to set it to 7 @ 1711Mhz.
This was easy done in Windows. Cards worked great. Here I can't force power play to pass 220W. Setting --setoverdrive to 10 and more crashes the system and does not change anything.
And --setmclk 0-2 does not change the mem freq. It is on level 3 constantly.
Even changing --setprofile # # # # # does nothing.
GPU[1] : Minimum SCLK: 1600MHz
GPU[1] : Minimum MCLK: 945MHz
GPU[1] : Activity threshold: 0%
GPU[1] : Hysteresis Up: 0ms
GPU[1] : Hysteresis Down: 200ms
Did you attentively read the reference? And that you will burn the card and all.
Try it
--setoverdrive % Set GPU OverDrive level (manual|high)
--setoverdrive #: This sets the percentage above maximum for the max Performance Level. For example, --setoverdrive 20 will increase the top sclk level by 20%. If the maximum sclk level is 1000MHz, then --setoverdrive 20 will increase the maximum sclk to 1200MHz
But personally I didn't try it.
May be --setoverdrive High