Post
Topic
Board Beginners & Help
Topic OP
dual r9 290, computer crashes after a few seconds
by
barisdad
on 29/12/2013, 08:22:55 UTC
Hi,
I am trying to mine on a machine with 2 r9 290 cards. I run cgminer and it starts without any errors, but after a few seconds of work my computer crashes and I have to restart it using the power button on the back.
I tried ubuntu 12.04 server 64 bit with xdm, then installed xubuntu on the server and also tried running batm from a usb stick. Same results.
I am using catalyst 13.12 linux drivers.
I am currently running the pre-built cgminer 3.7.2. I also tried building it from source but it segfaulted when I tried to start it.
I also installed app sdk 2.9 and adl sdk 6.0 when I tried to build cgminer.

I tried these cgminer configurations:
1. --scrypt -o stratum+tcp://gigahash.wemineltc.com:3333 -u .1 -p -g 1 -w 512 --lookup-gap 2 --thread-concurrency 24500 -I 20 --gpu-fan 70 --gpu-engine 947 --gpu-memclock 1250 --gpu-powertune 20

2.
{
"pools" : [
{
"url" : "stratum+tcp://gigahash.wemineltc.com:3333",
"user" : ".1",
"pass" : ""
},
{
"url" : "stratum+tcp://usa2.wemineltc.com:3334",
"user" : "",
"pass" : ""
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"scrypt" : true,
"gpu-threads" : "1",
"gpu-engine" : "1000",
"gpu-fan" : "75-100",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"intensity" : "20",
"vectors" : "1",
"worksize" : "512",
"lookup-gap" : "2",
"thread-concurrency" : "24550"
}

3.
{
"pools" : [
{
"url" : "stratum+tcp://gigahash.wemineltc.com:3333",
"user" : ".1",
"pass" : ""
},
{
"url" : "stratum+tcp://usa2.wemineltc.com:3334",
"user" : "",
"pass" : ""
}
],

"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "32765",
"gpu-engine" : "1000",
"gpu-fan" : "40-100",
"gpu-memclock" : "1350",
"gpu-powertune" : "20",
"temp-cutoff" : "99",
"temp-overheat" : "95",
"temp-target" : "90",

"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "1",

"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"scrypt" : true,
"kernel" : "scrypt",
"kernel-path" : "/usr/local/bin"
}


I also tried with a 947 clock instead of 1000. same results.

This is my hardware configuration:

2 X Radeon R9 290 GPU - 4GB 512 bit DDR5 mem 21227-00-40G -Sapphire
GA-870A-UD3 Rev 2.0 - AMD 870 Chipset - GA-870A-UD3 -Gigabyte
AMD Athlon II X2 270 - 3200 MHz - 45nm -ADX270OCK23GM -AMD    
Gamma 50 Intel LGA775 and AMD socket AM2 Gamma-50 -DEEPCOOL    
4GB DDR3-1600MHz, PC3-12800, CL11-11-11- F3-1600C11S-4GNS -G-Skill    
500gb - 3.5 inch - 7200 RPM - SATA3 6Gb/    DT01ACA050 -Toshiba    
Cougar Solution Middle Tower Case - Dime    67M3-NPS -Cougar    
120mm Low Noise Sleeve bearing fans - 4-   R4-S2S-124K-GP -Coolermaster    
OCZ850GXSSLI - 850W PSU - OCZ

Thanks.