Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 3.0c: fastest Ethereum/Ethash miner with lowest devfee (Windows)
by
human75
on 17/07/2018, 21:37:02 UTC
Quote from: PhoenixMiner on July 17, 2018, 06:57:52 AM
Quote from: daveinli on July 02, 2018, 03:39:53 PM
...


Quote from: human75 on July 04, 2018, 11:34:55 AM
Hi.
phoniex miner crashes just after starting load gpu log file doesnt give too much info.here is the log:

Code:
2018.07.04:11:54:56.713: main Phoenix Miner 3.0c Windows/msvc - Release
2018.07.04:11:54:56.713: main Cmd line: -pool etc.arsmine.net:8008 -wal 0x1c9cfc8a55dc86cee1c07a354593428d8894ad30 -worker Robert -pass x -coin etc -rmode 1 -wdog 1 -log 2 -ftimeout 200
2018.07.04:11:55:10.755: main Available GPUs for mining:
2018.07.04:11:55:10.755: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.07.04:11:55:10.756: main GPU3: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU4: Radeon RX 570 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU5: Radeon RX 570 Series (pcie Cool, OpenCL 2.0, 8 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU6: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU7: Radeon RX 570 Series (pcie 10), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.07.04:11:55:10.756: main GPU8: GeForce GTX 1070 (pcie 11), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2018.07.04:11:55:10.756: main GPU9: GeForce GTX 1050 Ti (pcie 12), CUDA cap. 6.1, 4 GB VRAM, 6 CUs
2018.07.04:11:55:10.756: main GPU10: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 4 GB VRAM, 36 CUs
2018.07.04:11:55:11.338: main ADL library initialized
2018.07.04:11:55:11.375: main NVML library initialized
2018.07.04:11:55:12.143: main Listening for CDM remote manager at port 3333 in read-only mode
2018.07.04:11:55:12.143: main Eth: the pool list contains 1 pool
2018.07.04:11:55:12.143: main Eth: primary pool: etc.arsmine.net:8008
2018.07.04:11:55:12.143: main Starting GPU mining
2018.07.04:11:55:12.143: main Matched GPU1 to ADL adapter index 32 (method 1)
2018.07.04:11:55:12.425: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7
2018.07.04:11:55:12.426: main GPU1: using AMD driver ver 18.6.1
2018.07.04:11:55:12.426: main Matched GPU2 to ADL adapter index 80 (method 1)
2018.07.04:11:55:12.855: main GPU2: Created ADL monitor for adapter 80; overdrive version: 7
2018.07.04:11:55:12.855: main GPU2: using AMD driver ver 18.6.1
2018.07.04:11:55:12.855: main Matched GPU3 to ADL adapter index 64 (method 1)
2018.07.04:11:55:13.369: main GPU3: Created ADL monitor for adapter 64; overdrive version: 7
2018.07.04:11:55:13.369: main GPU3: using AMD driver ver 18.6.1
2018.07.04:11:55:13.370: main Matched GPU4 to ADL adapter index 96 (method 1)
2018.07.04:11:55:13.752: main GPU4: Created ADL monitor for adapter 96; overdrive version: 7
2018.07.04:11:55:13.752: main GPU4: using AMD driver ver 18.6.1
2018.07.04:11:55:13.753: main Matched GPU5 to ADL adapter index 112 (method 1)
2018.07.04:11:55:14.328: main GPU5: Created ADL monitor for adapter 112; overdrive version: 7
2018.07.04:11:55:14.329: main GPU5: using AMD driver ver 18.6.1
2018.07.04:11:55:14.329: main Matched GPU6 to ADL adapter index 48 (method 1)
2018.07.04:11:55:14.627: main GPU6: Created ADL monitor for adapter 48; overdrive version: 7
2018.07.04:11:55:14.627: main GPU6: using AMD driver ver 18.6.1
2018.07.04:11:55:14.627: main Matched GPU7 to ADL adapter index 16 (method 1)

--------------------------------------------------------
Any help? 2.9d works with out any problem.
Many thx in advance
  Please try the following:
   - increase the page file size to 32 GB (10 x 2.6 GB per DAG plus a few GBs for Windows)
   - try using -amd option to see if the rig starts without the Nvidia cards
   - try using the -lidag command-line option and/or the -gser command-line option to decrease the intensity during or serialize the DAG generation

 when i add -amd yes version 3.0c starts without crashing.
   pagefile is already 60gb. -lidag and - gser didnt make any diffrence.
So now what is your advise to make it work version 3 with amd and nvidia together?many thx