I wish I could help you, but I don't know why you cannot connect. You currently are running one Cube without any issues right?
The only thing that I think could be effecting it is that your router and your computer are not on the same subnet, one is on 10 and the other 1...
How did you get your first Cube running correctly? How come you cannot replicate that course of action?
The only thing that I think could be effecting it is that your router and your computer are not on the same subnet, one is on 10 and the other 1...
How did you get your first Cube running correctly? How come you cannot replicate that course of action?
I got the first one running by using 192.168.1.1 on both the IP and Gateway. I finally got both to the same addy this time too, but still could not connect. I have used both my laptop and desktop. It is almost 9am hear and I have been at this since 5:30.
I don't know if I can access the router set up page or not. I will try and report back.
If I recall correctly, your router's (gateway's) IP address is 192.168.10.1. Try to type this into your browser.
Right. I am in the admin of my wifi router.
The information is
IP address: 192.168.10.1
Default gateway is also 192.168.10.1
Now that I am in the admin of the router, what do I do? Is it safe to change the IP address? If I change the IP address will I be able to log back into the router and change it back?
You can change the router's IP address, but MAKE SURE your laptop or PC are set to DHCP and not a static IP address. If your PC/laptop have static addresses, you will be unable to connect to the router's new address (because it will be on a different subnet). You can confirm this by going to your network adapter properties. Under IPv4, you should see it set up to "Obtain an IP address automatically."