Re: Bitmain E3 Ethash Miner ASIC (Shipping:16-31 July. $800 USD)
Was able to pick em up today and already hashing away. I didnt have to wait long for them to start (after I been reading some peeps have had to wait some time before they kick in)
Kinda annoying I cant control the fans, its farrrrking freezing here and be nice to turn them low - as it doesnt need much - 2500 rpm is more than enough but its doing its 3500rpm spin and then down to 1500 then back up after a few mins type shit. Basically silent to - gee thats gunna be annoying after a while (but no where near the 76dbs advertised - the l3+s are still louder and they are in boxes)
Other then that - decided to mine up some ETC instead for now.
Edit - its silent at 1800rpm (with all things considered)
Jul 4 2018 firmware - and zero HW errors to date - not even 1 for funsies
No setup options.
Kinda annoying I cant control the fans, its farrrrking freezing here and be nice to turn them low - as it doesnt need much - 2500 rpm is more than enough but its doing its 3500rpm spin and then down to 1500 then back up after a few mins type shit. Basically silent to - gee thats gunna be annoying after a while (but no where near the 76dbs advertised - the l3+s are still louder and they are in boxes)
Other then that - decided to mine up some ETC instead for now.
Edit - its silent at 1800rpm (with all things considered)
Jul 4 2018 firmware - and zero HW errors to date - not even 1 for funsies
No setup options.
Bro which pool did you use for ETC. I cant seems to get that
nanopool
etc-au1.nanopool.org:19999
is what I was using
Right now im on Ethermine doing some ETH
Hello could you explain how to use nanopool with this asic? Must I have to create a account to get paid. As I havent been paid yet and Im over 0.2 payout. I can see the page with my info aswel. Thought this would just be straight forward like back in the day with cleverminer..
If you are mining then its working. dont need an account. Just an address where to send, I use the asia link as I am in australia but for the most part I use what I wrote above for ETC - regarding nanopool the Minimum payout is 1 ETC
Nanopools works fine i you need something very easy.
just use the port: 9999
- not port: 19999 like indicate by NoIdeaAsWell in previous post
eth-eu2.nanopool.org:9999
wallet
x
or p=x,d=60120 ( this works only for the one received today some bach but the one you was paying 2.000Euro - not with the first i received at 800 -> actually the last are faster and cooler - just . of % )
ATT: you will see 15 minutes of temp and other indicator to 0 in your Miner Status menu on your ant miner. The machine will be very loud. Leave it like this and after 10-15 minutes the machine refresh herself and will start to show all the correct value. And what's more get very silent for asic standards.
this will happen with every pool if you have the little table on top of the controller with says:
"SubModel1:190"
invincible Bitmain!
just use the port: 9999
- not port: 19999 like indicate by NoIdeaAsWell in previous post
eth-eu2.nanopool.org:9999
wallet
x
or p=x,d=60120 ( this works only for the one received today some bach but the one you was paying 2.000Euro - not with the first i received at 800 -> actually the last are faster and cooler - just . of % )
ATT: you will see 15 minutes of temp and other indicator to 0 in your Miner Status menu on your ant miner. The machine will be very loud. Leave it like this and after 10-15 minutes the machine refresh herself and will start to show all the correct value. And what's more get very silent for asic standards.
this will happen with every pool if you have the little table on top of the controller with says:
"SubModel1:190"
invincible Bitmain!
ETC not ETH so my post is correct.