Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: EWBF's Cuda Equihash Miner 0.4
by
Regulater
on 21/07/2018, 18:31:47 UTC
Quote from: jovanmili91 on July 19, 2018, 02:26:21 PM
Quote from: xenonwon on July 18, 2018, 09:23:10 PM
Quote from: zimpixa_miner on July 18, 2018, 12:15:20 PM
Hello, since version 0.4 I'm having problems with stability.

Code:
18.07.2018 09:57:52 Temp: GPU0 54C GPU1 55C
18.07.2018 09:57:52 GPU0: 48 Sol/s GPU1: 27 Sol/s
18.07.2018 09:57:52 Total speed: 75 Sol/s
18.07.2018 09:57:57 CUDA: Device: 1 Thread exited with message: "an illegal memory access was encountered"
18.07.2018 09:57:57 CUDA: Device: 0 Thread exited with message: "an illegal memory access was encountered"
18.07.2018 09:57:57 WARNING: Looks like GPU0 are stopped. Restarting...
18.07.2018 09:57:57 INFO: GPU0 are restarted.
18.07.2018 09:57:58 WARNING: Looks like GPU1 are stopped. Restarting...
18.07.2018 09:57:58 INFO: GPU1 are restarted.
18.07.2018 09:57:58 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
18.07.2018 09:57:58 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
18.07.2018 09:57:59 WARNING: Looks like GPU0 are stopped. Restarting...

After this message autorestarting loops until manual restart.

I'm using same OC settings as with v0.3 which were rock solid (up to 16 days of continous mining)

ATM I lowered OC a bit and testing if problem still occurs.

I have this problem, with 0.3 work full time, 0.4 same OC and have problems.

Quote from: tutorialevideo on July 18, 2018, 06:19:06 PM


Have same problem wtih version 0.4. I didint have that problem with 0.3 with same OC. after a while, a problem appeared...



Exact same issue here. Updating to .4 caused instability with the OC. Had to lower the OC across my rigs that were running stable multiple day runs on .3.