Post
Topic
Board Mining software (miners)
Re: Antminer S9 Volt Rocket Ship firmware mod! ~Time to Max Out Your Bitmain PSU~
by
taserz
on 26/07/2018, 04:41:12 UTC
OK. I am at 750MHZ, 91C, 15,309.53 RT. HW errors are about 2 per minute. Too high I think.

Check that. HW error rate decreasing. Looks stable now. 22 minutes in.

HMM. HW error rate back to 2 per minute. 27 minutes in.

2 per minute is right around where you want to keep it. Anything more you should tune it down. But let it run for a while the hw errors tend to stop after it gets going for a bit. I have had stock s9's do 200 hw errors in an hour.

But I found once you get it running for a bit it tends to slow down.

725 isa what many were finding is best for 13.5 and 14 s9. Some 14th s9 were going pretty high.