Could you please clarify 0.05 screen and 0.045 balls? You don't mean 0.5mm screen and 0.45 balls? If what you said originally is correct I can seem to find the supplies on eBay. Congrats on the water cooling!!! Kinda thinking, I didn't go this way but on eBay they have water blocks for like 10-15$ Hook um all up with a pump and a big enough rad and that's pretty tits. Just an idea as I know those self contained units arn't cheap on their own. Check out the water cooling they did with the 60 Ghs models.
FYI I have 8 12v rails 25A, 2 jalapenos a piece. My custom 16 gauge wires are a little warm on the 2 jalapenos 1x6 chips 1x4 chips. The 18 gauge wires from the power supply are actually warm-hot to the touch. The insulation isn't melting yet but I think I need to pull the weak link out. 6 chips still running magical under 60c on air..........
Yep, added an extra zero. .5 screen, .45 balls. Or maybe they are .5 balls but I think they're a bit smaller. Works well enough. Don't use too much heat to melt them on; I really cooked a few off on my second reballing. Oh well, clean and try again.
Double up the wires coming from your power supply; I tripled the 18 gauge wires together and they seem to hold. But the Corsair has 16 gauge wire by default and that thing runs all sorts of stuff. It's got an 8 chip chili, 7 chip air cooled, and 5 chip jalapeno. I think I'll move the water cooled 7 chip in there as well, or maybe another 5 chip unit. It's a very good power supply.
Wish I could get the danger jally up and going, seems to just fast-flash. Might be a firmware problem, I'll check that next.
C