im getting:
failed to build program.
Failed to initialize device number 0.
Anyone a clue how to fix this?
Opencl shows the devices like it should.
ETHminer works without a problem.
Hopefully someone can help or point me into the right direction.
Thanks.
can you paste a screenshot here please. That will be more helpful for ppl here to understand your problem and solve a solution for this.
And you should also give your rig specs. And remove if you have any nvidia GPUs in your mining rig. And try again.
Got it working now. Upgrade to the latest kernel 4.15 and now its working.
But for some reasons i cannot change the powerplay mode with using rocm-smi
/opt/rocm/bin/rocm-smi --setfan 180 --device 0 --setsclk 5 --setmclk 3 --setperflevel high
sclk stays at 4 not switching to 5
How are you guys overclocking/undervoltage?
i was trying to undervolt on ubuntu. and after spending all day reading every forum i could find i gave up and install ethos 1.3.2
i was able to set 6 rx 580 8gb to run at 18.2 mh/s and pulling only 570w from wall.
you can install tdxminer to ethos if you follow this guide
https://github.com/unrealjke/ethos-tdxminerand you can use my local conf
globalfan 70
maxgputemp 85
globalvolt 950
tdxminer=proxypool1 lyra2z.eu.mine.zpool.ca:4553
tdxminer=poolpass1 c=BTC
tdxminer=proxywallet YourPayoutWalletBTC
miner YourHostName tdxminer
cor YourHostName 1180 1180 1180 1180 1180 1180
mem YourHostName 2150 2150 2150 2150 2150 2150
pwr YourHostName 115 115 115 115 115 115
dpm YourHostName 6 6 6 6 6 6
vlt YourHostName 950 950 950 950 950 950
vddci YourHostName 900 900 900 900 900 900