Post
Topic
Board Mining software (miners)
Re: Two stage performance tuning for S9 / S9i (include version for immersion cooling
by
developer00
on 17/08/2018, 08:48:08 UTC
10 minute resets confirmed by other testers too.

Feedback (does not mean 100% right):
1) "S9 works, but every 10 minutes it climbs to check the devfee pools. Pools are disabled, so every 10 minutes the ASIC is rebooted with this firmware."
2) "Loaded into S9, worked 10 minutes and fell off the pool, connected again to the pool worked again 10 minutes and again fell off.
Happens and works on the pool for 30 minutes, then did not check."
3) "One of the S9 with firmware 6b goes into reboot every 10 minutes."

The chips were checked every 10 minutes, and if they were faulty, they were corrected and rebooted. Now I changed the algorithm, there will be fewer reboots, if I can not correct all the chips, then there will be no more reboots.

in Kernel Log you can see which chips are corrected and to what value