Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Hardware
Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board
by
loshia
on 10/01/2014, 05:15:46 UTC
Quote from: gusto88 on January 09, 2014, 09:10:37 PM
Quote from: newminer1988 on January 09, 2014, 10:46:17 AM
Quote from: loshia on January 09, 2014, 05:23:18 AM
Quote from: newminer1988 on January 08, 2014, 09:57:03 PM
Hey there everyone!
I am so close but there is still something going wrong.


Anyone know why this happens?
Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Had some similiar behavior as I attached two HEX16A2 with Sata to Molex adapters to my current PSU.
As it turned out, the Sata To Molex Adapter was touching the board and could not be inserted completly.
A knife and some minor tweaks to the adapters and everything is working fine.

Maybe you could check, if this might be the case with your setup, too. Smiley

Nice but be careful each board eats a lot of amps clocked so it is not a good idea for sure to use the adapters