Post
Topic
Board Announcements (Altcoins)
Re: [ANN] 42 | + | + super rare + | + | + | + only 42 coins to be mined + | + | + |
by
RJX
on 14/01/2014, 15:08:34 UTC
HW=2 on intensity 16

it was 0 all the time, can anyone advise?

thanks

2 is not a problem...

(HW/(A+R))*100 if its less than 2-3% its fine


Thank you. It's 3.2%

been pooling at http://42.argakiig.us and it's taking it's sweet time Smiley

mm 3.2 is a bit annoying because it means you lose shares. I would look up your card for any extra flags that may help reduce those errors or alternatively if you have only just started the miner then wait for a while and calculate again you may see that it is slowly reducing. Also adding flags may well increase your hashrate by a lot so watch out for temps on the card etc. Be careful.

it was at 0 all the time with these flags:

--intensity 16 --gpu-engine 800 --gpu-memclock 1125 --worksize 256 --thread-concurrency 5760 --no-submit-stale -g 1


afk, I=18 and also gave me hw= 0 most of the time. card is hd5850 sapp 2gb toxic, temp is 70C, normally 72C.

no oc, flags are same as card setting.

any tips? maybe turn the pc for a while to let it gather strength???it's been hummin a while.