After the 3 day in town delivery UPS finally get you 
May I can try helping
May I can try helping
Dear Martin,
...
So i tried your boards with hexmine in win7, tried all the combinations got 42gh with one board, 77ghs with two, 91gh with three, 101gh with foor
it's little wired why its slowing down when you add another device, it's suppose to be additional.
...
Thanks
My first thought from reading that is that your boards are being starved of power as you connect more. Have you tried running each one singularly to make sure they perform okay. Then try them together on different power sources (if you have two or more PSU's available), so you've got PSU one to board one, and PSU two to board two etc, and let us know the results. What settings are you using in Hexminer, can you post a screenshot?
It's seems power issue but 2 of 500w psu connecting 4 boards only.
What is the make model of your power supply? It's probably got multiple low amp rails.
I use 350w Enermax PSUs they have 2 power rails and 4x molex on 3 seperate wires and only cost <£30/$40 they run 4x Hex16B no problem.
CIRCLE RAW POWER 500 WATT
Hard to find any info on this PSU I could only find this graphic in the Google cache as originals seem to be deleted from their web site.
If correct it may have only 28A x 12V = 336W on the 12v rail.
Quote
But their web site says it's dual 12v rails so maybe it's 335W/2 = 168W max on a single rail/wire.That would explain why it's only powering 2x Hex16B.
Use one psu hub powers from it and as menu boards you can + tplink and forget
Any way, i have 10 boards to feed tomorrow and im going to buy : Antec HCG Series HCG-900W
I think it will be enough for all, with 4 x 12v rails and 8 morlex and i will use 2 other molex from the other PSU.
Watch the 12 w rail
Buy a tplink and if you can order the hub mentioned in my post from amazon.de if you are German
I can send you the link later for the hub if you want
I have 9 boards to 700 w psu with 20 days uptime + tplink when done right
I am changing the software two often
Throw away 5v tpli k adapter + hub 5v adapter also
Thanks Loshia,
I will let you know, tomorrow