Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining software (miners)
Re: BFGMiner 3.9.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, Merry Christmas!
by
drukoz
on 15/01/2014, 03:30:38 UTC
Quote from: Laxe on January 14, 2014, 10:56:09 PM
Quote from: Mudbankkeith on January 14, 2014, 07:11:48 PM
Quote from: Laxe on January 14, 2014, 05:02:18 PM

Well v3 doesn't do much better than v2 for me.  Same as you I can't OC the U1's even with the new '--set-device antminer:clock=x0981' command.  BFG Miner returns an ' unknown option' and cycles through different frequencies before defaulting to 0781.  

Are you guys using a .bat file or a regular shortcut?

regular .bat for me.    Saved as a desktop shortcut.

Ok after letting v3 run for a bit longer I'm getting no more HW errors compared to oc'ing with v2 which is a relief!  Below is my four U1's running at 0881, the rate is slightly off but I'm happy with it now. Smiley

 Block: ...5aae6b5d #280517  Diff:1.79G (12.81Ph/s)  Started: [22:32:57]
 ST:15  F:0  NB:5  AS:2  BW:[ 67/ 63 B/s]  E:25.08  I:81.01uBTC/hr  BS:1.27k
 4             |  8.20/ 8.02/ 7.18Gh/s | A:1489 R:5+9(.92%) HW:0/none
--------------------------------------------------------------------------------
 AMU 0 :       |  2.07/ 2.01/ 1.78Gh/s | A: 353 R:2+2(1.1%) HW:0/none
 AMU 1 :       |  2.01/ 2.00/ 1.88Gh/s | A: 405 R:1+5(1.3%) HW:0/none
 AMU 2 :       |  1.99/ 2.01/ 1.82Gh/s | A: 378 R:1+1(.51%) HW:0/none
 AMU 3 :       |  2.03/ 2.01/ 1.70Gh/s | A: 353 R:1+1(.74%) HW:0/none
--------------------------------------------------------------------------------

I'm still confused with all the 'unknown freq' blurb when I use the new '--set-device antiminer:clock=xHEX' but so long as it works... 

idk if u noticed but ur running them at 0881 for 1.8 ghs when u should be running them at 0981 for 2.0 ghs just a tip Cheesy