Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.
Ive tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.
https://preview.ibb.co/ew35AU/6312_C615_F089_45_B7_BFFD_C04_DC9_D23410.jpgTwo 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a
power monitor on each supply - just to be sure).
A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.
Thanks brother.
Ive temporarily remove the 2 faulty cards for now and will try your method in awhile. Will give an update soon.
