Now PhoenixMiner 3.5c is working without that "ERROR: Debugger found" error. Thank you!
I will create a pull request for
https://github.com/rainbowminer/RainbowMiner, so that they integrate the new version as soon as possible.
Did you ever check it together with OhGodAnEthlargmentPill on GTX1080Ti? Does it crash or will it work?
borox
Thank you for the update! Yes, we are running a 1080Ti with OhGodAnEthlargmentPill all the time, and it works fine, increasing the hashrate to 52-53 MH/s.
thx got it !
BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
You can manually change the GT for a specific card by first pressing the
x key to select the GPU and then using
+/
- will affect only the selected GPU. Note that using this method, you can also run auto-tune on specific GPU - if you select a GPU with
x, and then when you press
z, it will start auto-tune only for the selected GPU. Finally, by pressing
x again you can go back to adjusting the GT for all GPUs at the same time.
Would be nice to see progpow implementation.
We are definitely onboard with ProgPOW but for now there is no consensus when (or even if) it will be accepted. Even if the proposal is rejected by the ETH developers however, if there is enough interest, we will definitely provide it as an option.
@Pheonixminer Pls fix -tt function, works so badly with many cards.(Asus Strix rx580 8gb, XFX rx570 8gb, Asus Strix Vega 64)
Sorry about that, could you please tells how it behaves and how you would you like it to. From the aforementioned cards the support is probably worst for the Vega, but we will improve it in the next release.
3.5c fixed my issues, thank you
Thank you for letting us know.
testing it now...
2018.09.12:20:04:41.378: main Phoenix Miner 3.5c Linux/gcc - Release build
...
2018.09.12:20:04:41.427: main OpenCL driver version: 17.50-511655
...
At least it detects the driver properly now, so it should work better.
rx 570
phoenixminer-3.5_c
Unable to open log file /var/log/miner/phoenixminer/lastrun_noappend.log - 2
No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.
custom phoenixminer exited, waiting to cooldown a bit
amdgpu-pro driver 18.20-606296
Ubuntu 18.04 LTS
Linux Kernel 4.15.0-33-generic
Thank you for the report, we will use 18.04 LTS to see if we could reproduce it. It seems that the OpenCL driver can't be loaded at all.
I've managed to set everything up and I went from 183.6 to 186.6 with around the same power usage.
Sometimes when changing config or when restarting the rig I have an issue.
Mining working:
Eth speed: 186.634 MH/s, shares: 130/0/0, time: 0:44
GPUs: 1: 33.274 MH/s (25) 2: 33.700 MH/s (20) 3: 30.380 MH/s (18) 4: 28.789 MH/s (18) 5: 30.340 MH/s (28) 6: 30.151 MH/s (21)
Config Change with phoenixminer restarting:
phoenixminer
http://download.hiveos.farm/custom/phoenixminer-3.5_c.tar.gz
Already installed
Creating epools.txt
Appending user config
Phoenix Miner 3.5c Linux/gcc - Release build
--------------------------------------------
After this nothing happens. Restarting phoenixminer doesn't seem to work - as the same sequence of events happen. Restarting the entire rig works most of the time.
Edit: I'm using HiveOS which could be the issue since it's not officially supported.
Could you please tell us the version of HiveOS? We will try to install it here and reproduce it.