Those of you who use CGwatcher to monitor your performance, which values do you typically have in "Efficiency" field?
As I understand, it shows Getworks to Accepted shares ratio. I noticed that it used to hover between 90% and 100% on this miner (7970 at 760kh/s) before the boom of middlecoin, but nowadays it never goes above 40%. I also use "restart miner if # of accepted shares doesn't change for 3 minutes", but I guess with the latest upping to 1024 diff I have to be more conservative and set it to like 5 or 6 minutes.
What do you guys think?
My efficiency is decreasing for rigs with stats running since a few days and is dramatically low for the rig I've just restarted.
2 2xgpus rigs were around 96% they are now around 84% without a restart.
1 1xgpu rig was around 50% and is now around 25% after a restart.
As yesterday I had quite a high unexchanged balance I can't already say if my payouts will be lowered.
My hashrate seen on middlecoin stats is still approximatively the same (higher in fact but I added one more 7950).
There are many ways to calculate efficiency, dunnow which is the more accurate.