OK, so based on that I uninstalled Zadig driver again and ran it and now is working with 3.10.  

this is the command I used, just overclocked to 1.80 to test.

"bfgminer  -o stratum+tcp://us1.ghash.io:3333 -u XXXXXXXX -p 123 -S antminer:\\.\COM5  --set-device antiminer:clock=x0881"

and nothing else.  Do I need to add what I see other people adding such as "--icarus-options 115200:2:2 --icarus-timing 2.5=90 "  or is that just for the BEs...I am asking b/c with CG it has something like "bmsc-options 115200:20"  BFG does not like that bmsc...do I need to add something with this 115200:00 or am I done?

It seems to be doing good so far ZERO  HW errors where I was getting around .02 before...below is pic, the only thing is I see a lot of "Stratum from pool 0 requested work update" where with CG never got that there.




But seems to be working mighty fine now, will try OC to 2.00

at OC 1.8  hashing as below



I guess my only question is the "Stratum from pool 0 requested work update" and can I add something else to the command. I was  not getting that with CG but I guess BFG has different info?