I have some dayun zig z1's coming soon and I'm gong to pair it with Bitmain APW3++ PSUs. My first time using ASICs but the label on the PSU looks like this:
https://drive.google.com/drive/folders/1IRWfMKgP_t-aeW4Mk_T4jNyGnMnQFCMf?usp=sharing
I live in the USA so I have 120VAC outlets. Bitmain's site says it can switch to 120VAC and I also see products with the label stating 120VAC but this one doesn't. Should I stay away from this? Also, the miners work on 120VAC outlets right?
https://drive.google.com/drive/folders/1IRWfMKgP_t-aeW4Mk_T4jNyGnMnQFCMf?usp=sharing
I live in the USA so I have 120VAC outlets. Bitmain's site says it can switch to 120VAC and I also see products with the label stating 120VAC but this one doesn't. Should I stay away from this? Also, the miners work on 120VAC outlets right?
If i remember correctly, APW3++ is capable of delivering ~1200w on 110VAC, so you are cutting it really close since the Dayun Zig Z1 requires about 1200 watts. If APW3 output voltage drops a bit your miner may get unstable so i recommend that you monitor it carefully the first hours.. Oh, and when you get your miners, come joins us at powermining.pw
