Re: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

I was able to get mine working by burning this firmware on a new USB stick:

https://drive.google.com/open?id=1z564S10Q3SWN8-8_HmreuUCQEI_gXYl9

Not sure how to load this onto the USB, do you need to extract the files first.

Z1 not booting at all.

There is included usb imaging software in the first folder I believe. You also need to unzip the .7z file, because it contains the image. Run the imaging software and choose the image that was unzipped.

I used a different usb drive thanwhat came with it and after a couple user error problems, I got it to work.

Can you elaborate on how you got it to work? I bought a 16 GB flash drive and loaded the image via the included exe, but I can't connect to the machine's web interface to make changes or set the static ip.

Are you on a 192.168.1.x network, the default IP is 192.168.1.100

No, I'm on 192.168.0.x

That's your problem. Either give yourself a 192.168.1.x address and connect to the ASIC directly to change the Z1 IP to 192.168.0.x, or change your network to 192.168.1.x. You could cheat by changing the subnet on the network from 255.255.255.0 to 255.255.0.0