Not sure how to load this onto the USB, do you need to extract the files first.
Z1 not booting at all.
There is included usb imaging software in the first folder I believe. You also need to unzip the .7z file, because it contains the image. Run the imaging software and choose the image that was unzipped.
I used a different usb drive thanwhat came with it and after a couple user error problems, I got it to work.
Can you elaborate on how you got it to work? I bought a 16 GB flash drive and loaded the image via the included exe, but I can't connect to the machine's web interface to make changes or set the static ip.
I am assuming it is hard wired into the router. I turned it on and waited a couple miinutes then logged onto my router to find our the IP address by looking for all devices connected to the network. It should be called Dayun (mine was) and I think initially it defaulted to 192.168.1.176 for me. If it doesn't even show up in your router, then I really don't know. Maybe try a different PSU to the control board, but between the original usb boot drive and the new one, it should at least get connected to the network... otherwise maybe there is something else wrong.