Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 3.5d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
happyleper
on 05/10/2018, 20:33:44 UTC
Quote from: gsrcrxsi314 on October 04, 2018, 11:24:08 PM
Quote from: happyleper on October 04, 2018, 09:53:16 PM
Quote from: gsrcrxsi314 on October 03, 2018, 06:46:50 PM
Quote from: crypper on October 03, 2018, 08:00:17 AM
Quote from: agismaniax on October 02, 2018, 02:54:42 PM
I always use custom fan curve setting in MSI Afterburner or Sapphire Trixx. I set the fan speed to 5 points above the GPU's temperature. For example, if the GPU's temp is 52C, then the fan will spin at speed of 57%, 65C temp 70% fan, and it always spin based on current GPU's temp. Can this custom fan curve setting be done via PhoenixMiner?

ALWAYS use 3rd party soft to control clocks, power and fans: OverdriveNtool for red and nvidiaInspector for green; don't use AB - it's shit. Don't use miners for controls.

AB works just fine. And will apply clocks at boot. Can nvidia inspector do that?

With a properly configured batch file that runs at startup, yes, it can.

So natively, it cant. Thanks.

With a power reduction on a 9 GPU rig of nearly 20 percent using NVIDIA Inspector over Afterburner, I think running a batch file at startup is a small price to pay.

https://www.reddit.com/r/EtherMining/comments/9ah7qc/how_to_tune_nvidia_gpu_for_best_efficiency_nvidia/