here is my feedback.
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
https://www.screencast.com/t/BLnyFx0Ihttps://www.screencast.com/t/pBDcSQmGpwe{
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}
and this is the results
https://www.screencast.com/t/2nltNThwIBQhash rate quite erratic but never higher than 5GH
https://www.screencast.com/t/8cvezEcAnDnicehash stats
https://www.screencast.com/t/XuROlvulVAany feedback or suggestion, very welcome