So after the concerns of some of the people from this thread, here is what I put together. These 2 are the PSU that I purchased to run the miner.


This is the speck of the PSU. I wanted to know if there was anything I was missing in terms of why it is not working? Anything can help.


I then dismantled the whole Power distribution board. I saw no damage to the board. This is what it looks like.


This is how i set it up. At the ESP I tried both locations. Are the PCIe's location specific? The CPU goes in well.


So over all I can run it when the Blade is not connected nor the fan. But I hooked it up to the other side and it ran ok.
I disconnected the fan so only the fan on the PSU moves. Then I plug in the blade and the PSU just powers down. I got the stock PSU running fine and hashing away on one blade. I'm just thinking of getting a 1200w single rail to make this problem go away. If anyone else has an idea I would love to hear it. I feel myself loosing money everyday.. Damn...