Hi,
just in case someone needs a finer speed setting:
Frequency | Hashrate | value | timeout
125.00 MHz | 1000 MHs | 0481 | 042 ms
137.50 MHz | 1100 MHs | 0501 | 039 ms
150.00 MHz | 1200 MHs | 0581 | 035 ms
162.50 MHz | 1300 MHs | 0601 | 033 ms
175.00 MHz | 1400 MHs | 0681 | 030 ms
187.50 MHz | 1500 MHs | 0701 | 028 ms
200.00 MHz | 1600 MHs | 0781 | 026 ms
212.50 MHz | 1700 MHs | 0801 | 025 ms
225.00 MHz | 1800 MHs | 0881 | 023 ms
237.50 MHz | 1900 MHs | 0901 | 022 ms
250.00 MHz | 2000 MHs | 0981 | 021 ms
262.50 MHz | 2100 MHs | 0A01 | 020 ms
275.00 MHz | 2200 MHs | 0A81 | 019 ms
or even finer for tweaking your individual miner:
237.50 MHz | 1900 MHs | 1285 | 022 ms
243.75 MHz | 1950 MHs | 1305 | 022 ms
250.00 MHz | 2000 MHs | 1385 | 021 ms
256.25 MHz | 2050 MHs | 1405 | 020 ms
262.50 MHz | 2100 MHs | 1485 | 020 ms
268.75 MHz | 2150 MHs | 1505 | 019 ms
275.00 MHz | 2200 MHs | 1585 | 019 ms
281.25 MHz | 2250 MHs | 1605 | 019 ms
287.50 MHz | 2300 MHs | 1685 | 018 ms
293.75 MHz | 2350 MHs | 1705 | 018 ms
300.00 MHz | 2400 MHs | 1785 | 017 ms
But beware. While playing around with this values or better some values not respecting the forumular given in the U1 manual I somehow wrecked my antminers clock generation.
Greetings,
miniasic.
That's interesting - what does the timeout mean?just in case someone needs a finer speed setting:
Frequency | Hashrate | value | timeout
125.00 MHz | 1000 MHs | 0481 | 042 ms
137.50 MHz | 1100 MHs | 0501 | 039 ms
150.00 MHz | 1200 MHs | 0581 | 035 ms
162.50 MHz | 1300 MHs | 0601 | 033 ms
175.00 MHz | 1400 MHs | 0681 | 030 ms
187.50 MHz | 1500 MHs | 0701 | 028 ms
200.00 MHz | 1600 MHs | 0781 | 026 ms
212.50 MHz | 1700 MHs | 0801 | 025 ms
225.00 MHz | 1800 MHs | 0881 | 023 ms
237.50 MHz | 1900 MHs | 0901 | 022 ms
250.00 MHz | 2000 MHs | 0981 | 021 ms
262.50 MHz | 2100 MHs | 0A01 | 020 ms
275.00 MHz | 2200 MHs | 0A81 | 019 ms
or even finer for tweaking your individual miner:
237.50 MHz | 1900 MHs | 1285 | 022 ms
243.75 MHz | 1950 MHs | 1305 | 022 ms
250.00 MHz | 2000 MHs | 1385 | 021 ms
256.25 MHz | 2050 MHs | 1405 | 020 ms
262.50 MHz | 2100 MHs | 1485 | 020 ms
268.75 MHz | 2150 MHs | 1505 | 019 ms
275.00 MHz | 2200 MHs | 1585 | 019 ms
281.25 MHz | 2250 MHs | 1605 | 019 ms
287.50 MHz | 2300 MHs | 1685 | 018 ms
293.75 MHz | 2350 MHs | 1705 | 018 ms
300.00 MHz | 2400 MHs | 1785 | 017 ms
But beware. While playing around with this values or better some values not respecting the forumular given in the U1 manual I somehow wrecked my antminers clock generation.
Greetings,
miniasic.
Is there any difference for example using 0981 or 1385 for 2GHz?
Can you give values for higher hashrates? I'm currently running mine steady @ 2.6 (4c81) with HW=0, just wanting to see if I could push it just a bit more.
(2.8 (4d81) is too much, the miner doesn't start)