Re: unlocked frequencies Z9 firmware (free)

Hello friend,

I have problem with your FW. FAN speed = 100% and temp is bad

https://www.imageupload.co.uk/images/2018/10/16/z9mini2.png

Please help me

Do you understand this thread is for the Z9 (not Z9 mini) ? ? ?

And for z9 mini you should be in this thread:
https://bitcointalk.org/index.php?topic=4610213.msg46938023#msg46938023
and there you will find permanent link to the may 26 firmware for the z9 MINI.

Ou ups! Thx for info ;-) For Z9 mini is same problem :-( after flash FW from batch 1 is temp 0 C and fan on maximal rpm

Have you UNchecked "keep settings" ?
Does it help ?

Have you downloaded latest from Bitmain and tested with UNchecked "keep settings" ?
https://service.bitmain.com/support/download?product=Antminer%20Z9%20mini

carefully Jiggle cables at fan connector on controllerboard, does it help with fan ?

If problem reading temp for system I guess it will run fan at 100% to protect components so...
carefully jiggle cables from hashboard at connector both on hashboard's AND connectors on controllerboard.

does anything help?

did problem occur when you flashed new firmware ?

try hardware factory restore:
https://enforum.bitmain.com/bbs/topics/3957