Guys can you share your hashrate for 1060 6gb/1070/1080ti with x16r algo.
I used 1.22 version of z-enemy my hashrate for 1060 is around 9mh/s for 1070 I got around 11mh/s for all 1080ti my hashrate is 23-27.
Can you recommend what clock is the best to mine on x16r algo if the electricity rate doesn't matter?
On x16r I am seeing 26-28 MH/s on my 1080TIs with 1.22 CUDA 10 running on ethOS 1.3.3.
In the first time that I run my 1080ti I can get almost 33-35mh/s but after a few hours the hashrate down to 23 to 27mh/s.
I'm using "Cuda 9.2 ( drivers ver 398+)" Are you using a default clock? Could you share some good clock and mclock settings, it seems that you can get better hashrate than mine.
I hope OhMyGod_company can develop a new software to push the GTX 1080ti for better performance like ETHpill.
your mileage and hash rate may vary, but this is what I am using:
flags -a x16r -i 21.5 -R 5
globalcore +175
globalmem -502
globalfan 20
globalpowertune 180
I have it limited to 180 Watts per card, you can let it go higher if you want. These same settings with z-enemy 1.10 on CUDA 9 were yielding 18-20 MH/s per card.
The free ethlargementpill only works for memory hungry algos and only on cards with GDDR5X VRAM. If you want something more, consider becoming a customer of OhGodACompany and see what they have available.