Thanks! I recently moved my miner off 2 separate PSUs (I at the time only had 120v plugs) over to a single APW++ and ran a dedicated 240volt line in my garage which acts as a heater for the pets  I used to be able to monitor draw based off of watching my solar monitoring GUI, but since the 240v is running directly off the main panel, and not the solar panel I'm not sure what the draw is. I know when I was running the 2 PSUs, I was easily maxing 1600w -/+ 200 with fluctuations and getting 14.7-15.3 TH/s mining rate with taserz BMMINER. I applied the latest LPM and plugged in Tazers BMMINER and I'm at 687MHz averaging high 14.x rate on an late model S9 that had the advertised rate of 13 something. I'm ok with the very small drop in hashing if I am actually getting 10% power savings. time will tell!