hey,
I have an antminer which is running anormaly slow.
In example with bfgminer known as AMU0 (5s avg/all time avg/effective avg):
AMU 0: | 2.08/ 2.07/ 0.07Gh/s | A: 4 R:0+0(none) HW:0/none
AMU 1: | 1.98/ 1.97/ 1.47Gh/s | A:50 R:0+0(none) HW:0/none
Another try:
AMU 0: | 2.10/ 2.07/ 0.10Gh/s | A: 0 R:0+0(none) HW:0/none
AMU 1: | 1.98/ 1.99/ 1.45Gh/s | A: 13 R:0+0(none) HW:0/none
AMU 2: | 1.98/ 1.98/ 1.48Gh/s | A: 10 R:0+0(none) HW:0/none
This antminer has been tested with different hubs (dlink, 49-ports...), alone, but it never reached more than 0,1Gh/s.
The 21 other units are working very well, so I guess the item is faulty
Screws are tight... and it's not getting hot at all ... Any idea?
I have an antminer which is running anormaly slow.
In example with bfgminer known as AMU0 (5s avg/all time avg/effective avg):
AMU 0: | 2.08/ 2.07/ 0.07Gh/s | A: 4 R:0+0(none) HW:0/none
AMU 1: | 1.98/ 1.97/ 1.47Gh/s | A:50 R:0+0(none) HW:0/none
Another try:
AMU 0: | 2.10/ 2.07/ 0.10Gh/s | A: 0 R:0+0(none) HW:0/none
AMU 1: | 1.98/ 1.99/ 1.45Gh/s | A: 13 R:0+0(none) HW:0/none
AMU 2: | 1.98/ 1.98/ 1.48Gh/s | A: 10 R:0+0(none) HW:0/none
This antminer has been tested with different hubs (dlink, 49-ports...), alone, but it never reached more than 0,1Gh/s.
The 21 other units are working very well, so I guess the item is faulty
Screws are tight... and it's not getting hot at all ... Any idea?
Two ideas:
1) you are running the miner for a short period - wait at least some hours
2) that is the hash rate the pool sees - with zero shares it is quite natural the hash rate is bad and dropping!!
Please, don't run the miners for 1 minutes and complain of slowness... I see AMU 0 running at 2.10 and the other two at 1.98!!!