Well I finally got my unit,

Samething as other users came with screws on the bottom of the box, also Mine had a big dent where the network cable is suppose to plug into the tplink,, the dent seems to have damaged the tplink controller as it was bent inwards. After pulling it open to double check everything before turning on, for the most part everything seemed to be in place and no capacitors were loose or anything, powered it up two fans came on but nothing for the tplink. Pulled it out from the case and started to fiddle with the usb power side bending the cable and noticed that it lighed up when i slightly bent the cable towards the board. so it seems it had a short. i used a tie strap to keep it slightly bent, and it seemed to work, got into system config and configured to my router and it started hashing and was doing pretty well at stock giving roughly 218 or so. Went to bed woke up this morning only to see a red led light on the case. Seems as if one of the PS's died, i sitched the cables around for the other PSU and managed to bring the system back online, with only one side hashing of course. So now it looks like I definately have to replace the PSU's.

But my questiion to the users here is which PSU has been confirmed to work and be stable without burning out ?