Hi, I have some questions some of you may be able to answer for me..  (using Strix Vega56s non flashed latest drivers) /w SRB miner.  

I was reading thru setting everything up that's all good. Works well but decided to also try out OverdriveNTool (latest version) based on some of the posts I've seen..

Questions:
My first 5 Power states appear to reset I apply them P6/7 get applied.  Is this normal? If not how do I correct that? (I've tried refresh/reload)

Also wondering if these settings take after a restart of the computer, They don't appear to.. at least not fully.


So far my workaround has been to start the computer.. Run Overdrive tool Loading a saved setting. Then use afterburner to manually set some things. Getting 1740H Per card (have 2 cards mining xmr) /w temps 52/55C Powerdraw 470W roughly total system (ryzen cpu mining to) So apparently it's sort of working... but i do have to rerun Overdrive everytime I reboot.. and I do have to use afterburner to adjust.

(Note before using overdrivetool I'd simply undervolt with afterburner by -131  set pl to 70%  Core to 1400 mem to 880 but temps would be 60/69c for the cards and about 150w more system power)