Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
Billsonl
on 28/01/2014, 03:18:16 UTC
i just received my 5th one and i cant log on to it.  192.168.1.99 is the ip, but i ipscan it and nothing comes up. my other miners are 2.xxx, is the 1.99 the problem?

Is your subnet .1 or .2?

im not sure what you mean but
IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1

this is what i have in


antminer ip 192.168.1.99

all my other ants are 192.168.2.xxx

You need to bring the new Ant 192.168.1.99   to   your network  192.168.2.x.    Set a laptop/PC/tablet  on  192.168.1.188  and configure the new Ant 192.168.1.99   and change the address to whatever you have reserved for it  on the 192.168.2.x  network.  Don't forget the IP default gateway is  192.168.2.1  and  DNS 8.8.8.8.  Subnet mask should still be the same on both subnets  255.255.255.0, so no change there.



ok thanks for your help.  I will give it another try this weekend when i have some time.  I tried following the instructions in the first page but it was saying that i need to buy some kind of wifi thing in Best Buy..