Re: SRBMiner Cryptonight AMD GPU Miner V1.7.0

Thanks @MinersRus .

I finally made my 6x vega 56 works. They are modded with vega 64 bios. No soft power play table. Miner is SRBMiner 1.7.0 and driver is 18.10.1

I follow the instruction here.

https://www.reddit.com/r/MoneroMining/comments/9pwedo/guide_to_reaching_2k_2020_hs_on_cryptonight_v8_on/

except the intensity is set to 120.
Total hash rate is 11900 H/s and the power on the wall is 1250w. Isn't this power consumption kind of too high? or it is normal for v8?

That actually is pretty good. V8 is much more power hungry.

Your power is 208 watts per Vega 56. My seven average 225 watts.

Can you provide what your Core P6/P7 frequency/mv are set to and the MEM_P3 frequency/mv is. Thanks

Here you go.

GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1084;950;0
GPU_P3=1138;1000;0
GPU_P4=1200;1050;0
GPU_P5=1401;1100;0
GPU_P6=1536;1150;0
GPU_P7=1552;840
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;950;0
Mem_P3=1100;875
Fan_Min=2750
Fan_Max=3500
Fan_Target=65
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0

Thanks, Here are my new numbers using your data: https://bitcointalk.org/index.php?topic=3167363.msg47961899#msg47961899

I do have a question about the memory voltage. I have set Mem_P3 to 875mv but in HWINFO64 the GPU Memory Voltage (mvddc) is shown as 1.250V no matter what Mem_P3 is set to. On your system what does HWINFO64 show for GPU Memory Voltage (mvddc)?