i have got the same problem with my batch 3 mini.
Once i install an other firmware the temperature sensors dont seem to work and the fans always spin on 100%.
Does anyone have the same problem and does anyone have a solution?
Thx!
I have released a fix for fan and temp issues on batch 3 and 4 units. There is a thread here about it. It does overclock and all the good stuff runs on batch1-4 minis
https://bitcointalk.org/index.php?topic=5073285.new#newchipless, correct me if I'm misspeaking, but don't batch3 units work just fine with batch1 firmware? Is your change not specific to batch4 otherwise?
Jason
Jason,
Not all batch 3 units work properly with the batch 1 firmware a few later releases of the batch 3 have similar fan or temp issues like the batch 4. Some were shipped with both rev1 and rev2 hashboards., don't know how many were sent out the door that way. Just like some minis may have a rev 1.0.0 controller while others may have a rev 1.x.x. It appears it is about availability and what was on hand during assembly.
Lets not get into a pissing match on every thread I offer the free fix.