Yes, but because it's loading the Erupter driver (I assume) the BFL spits out a temperature string error and never begins hashing. I've also noticed that usually 1 or 2 Erupters remain offline (steady green light) using that switch and trying to add them inside BFGminer results in me going through all the 'ls /dev/*USB*' results and still not catching them.

Running them under the ICA driver tends to get all of them seen...with, usually, 3 being seen as 'BEE'.
--running the 'all' command to add devices while in BFGminer.

EDIT:

And it would appear that "erupter:/dev/ttyUSB##"; going the full range of 'lsusb' results, only adds 6 of the Block Erupters. The rest all result in a 'No device found'