Did a test with my rig, 8 x 1070 under Linux Ubuntu LTE 18.04 Cuda 10.

Trex 0.8.2 first 4 cards intensity 21 / gpu +50 / men -400 / 170W -pl Brought me to 113 Raven/24h on a same miner

Trex 0.8.2 last 4 cards intensity 22 / gpu +50 / men -400 / 170W -pl Brought me to 98 Raven/24h on a same miner.

Great past 24h mining results I must say, blocks flying around but getting a lower result on a higher intensity makes you think and get nuts. What to do with your settings on a X16r also?

GUI on rig was usable, for graph I do use the internal Intel of course. nvidia-smi shows some spare on the pl of 170W sometimes it jumps a little over it on both settings. GPU use most of the time 100% temps around 69 C and fans running 60%

What bothers me is the intensity, there is just so little usable info for it on a wild algorithm like the x16r and is difficult to prove as well. A day later it react smooth and then really aggressive again. But that's probably also the reason it backs of the ASIC world of course.

For now I ?am happy and collecting, looking forward on shares of other experiences.


PS! switched now to t-rex 0.8.3 on Linux Ubuntu LTE 18.04 Cuda 10, till now it runs fine for 12 hours again.