Hello, i was wondering why my Blue Fury won't work, I've plugged it into my MinePeon run raspberry pi, no luck, and my computer, again no luck. I can see that its getting power because the lights come on. But it doesn't seem to work. 
Thank you!
1. you need a powered USB2 hub (your PC may have enough power but many do not) (the rPi will not drive a miner)Thank you!
2. Have you installed the correct drivers? (Here:- http://www.mediafire.com/download/819me4zvdju8lyg/bfgminerWin.zip)
3. what mining software are you using?
I'm using a powered hub, and mine peon has the drivers installed apparently.
And Ive tried using BFGMiner, and CGMiner.
Thanks!
What version of minepeon? the latest is 0.2.5 pr1
If you log into minepeon from your PC then all the pool and setup menus are there on screen.
Yes, its ver 0.2.4, but should that affect it? And it works fine with my three block erupters.
Thank you!
Initially there was a clash between bluefury and erupter drivers, the fix at the time was to name the ports, com1 com2 etc.
you will have to do some reading on the BFGminer thread as to how this works. https://bitcointalk.org/index.php?topic=168174.msg4819869#msg4819869
also on the minepeon thread https://bitcointalk.org/index.php?topic=251675.msg4806905#msg4806905
there is a lot of reading there,
unless someone else can jump in with more detail.
Still can't find out the cause and how to fix it. Could it be a fault with the device its self?
Thanks!