Re: BITMAIN Antminer support and OverClocking thread

How could I know which firmware version I have and what should I install in my Antminer S1s?
Thanks in advance.

Right hand side of the first line in the kernel log tab is the firmware release date

[ 0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #10 Thu Dec 26 09:03:53 CST 2013

Do you mind posting what you have a few lines down under "Determined physical RAM map"?

I have one miner with "memory: 02000000" and another with "memory: 04000000" and the one with 02 has trouble overclocking without getting 6% hardware errors.

I'm just trying to figure out if there's a problem with one or if was an upgrade to the hardware from the 2013/12/1 boards to the 2014/01/4 boards.

Hmmmm...I have just checked all my ant's, I have at least 1 from each batch and they all report "memory: 04000000" regardless of the build date on the boards. I suspect you have a bad wrt module Sad

Thanks so much for the confirmation, I've been scanning all the schematics I could find to try and find out where the problem might lie. I see both control boards are V1.2 and have the same date stamp, but there are differences in the hardware on them so wasn't sure if it might be due to that.