Yep, not good at all - looks like you only have 5.5 workers functioning. If you don't luck out with simply loose connectors, then either you're missing a ton of capacitors or (more likely) you've hit the fuse problem and will need either upgraded fuses or bridges to bypass them (dangerous but I've been running that way OC'd just fine for the last week+ full blast). If your ribbon cable is torn from shipping, that'd do it, too, but no doubt you would have noticed that when you got the unit.
I have in Api Log:
[STATS] => 0
[ID] => AVA0
[Elapsed] => 240
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 9
[frequency] => 1400
[fan1] => 0
[fan2] => 480
[fan3] => 480
[temp1] => 33
[temp2] => -1
[temp3] => -1
[temp_max] => 33
[Device Hardware%] => 6.2112
[no_matching_work] => 170
[match_work_count1] => 1
[match_work_count2] => 0
[match_work_count3] => 734
[match_work_count4] => 750
[match_work_count5] => 408
[match_work_count6] => 0
[match_work_count7] => 0
[match_work_count8] => 746
[match_work_count9] => 0
[match_work_count10] => 678
[match_work_count11] => 0
[match_work_count12] => 0
[match_work_count13] => 0
[match_work_count14] => 696
[match_work_count15] => 0
[match_work_count16] => 0
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 13141 0
I think it isn't good ?;/
[STATS] => 0
[ID] => AVA0
[Elapsed] => 240
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 9
[frequency] => 1400
[fan1] => 0
[fan2] => 480
[fan3] => 480
[temp1] => 33
[temp2] => -1
[temp3] => -1
[temp_max] => 33
[Device Hardware%] => 6.2112
[no_matching_work] => 170
[match_work_count1] => 1
[match_work_count2] => 0
[match_work_count3] => 734
[match_work_count4] => 750
[match_work_count5] => 408
[match_work_count6] => 0
[match_work_count7] => 0
[match_work_count8] => 746
[match_work_count9] => 0
[match_work_count10] => 678
[match_work_count11] => 0
[match_work_count12] => 0
[match_work_count13] => 0
[match_work_count14] => 696
[match_work_count15] => 0
[match_work_count16] => 0
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 13141 0
I think it isn't good ?;/
To change your fan speeds to slower speed use one these settings in the configurations, more options. depending on how yours is wired, one will give you fastest fan speed and the other the slowest fan speed.
--avalon-fan 80-80
--avalon-fan 20-20
Mtnminer
--avalon-fan 80-80
--avalon-fan 20-20
Mtnminer
Hi,
I received my bitmines today, they work form 1h and fan1 and fan2 have still 3360 RPMS, Temp id 21 degree, hoe to set this fans slowest ?
best regards
I received my bitmines today, they work form 1h and fan1 and fan2 have still 3360 RPMS, Temp id 21 degree, hoe to set this fans slowest ?
best regards