Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Added Extra config arguments: -coin ella
But it not helped... Miner still trying to switch to ethereum for dev fee:
The -coin command line option affects only the pool that is specified by -pool in the command line or in the config.txt file. For the pools in epools.txt, you have to specify the coin for each pool (usually PhoenixMiner is pretty good at detecting the current coin but since it fails in your case you must do it).But it not helped... Miner still trying to switch to ethereum for dev fee:
Code:
GPU1: Allocating DAG (2.80) GB; good for epoch up to #230
GPU1: Allocating buffers failed with: clCreateBuffer (-61).
GPU1: Allocating buffers failed with: clCreateBuffer (-61).
In hiveos there usually is a template epools.txt file, where you should add the COIN: parameter:
Code:
POOL: pool.ellaism.org:8008, WALLET: MyWallet, WORKER: MyWorkerName, PSW: x, COIN: ella
If you have successfully set the coin parameter for the pool, you should see "Mining ELLA on ...." (the host address of the pool) message on the PhoenixMiner console. If the problem persists, please let us know which Ella pool you are using as we have tested with all major Ella pools and the coin auto-detection seems to work fine.
nice dirty way , -gpus 2468 worked
There may be a problem for using this way ?
and , thanks PhoenixMiner is the best :X
No problem as it seems that both drivers are properly recognized. If one of them wasn't not recognized, you would get a yellow warning message about it in the first 30 seconds after starting the miner and your hashrate/stability may suffer. There may be a problem for using this way ?
and , thanks PhoenixMiner is the best :X
can you tell me .. its better have amd driver with open CL 2.1 ? or 2.0 ? thanks
There is no difference as far as mining goes.