So I use the order on top, or Window as described in my post, or Consol which is the miner?
I have always used the miner/consol as that is what was available.
The info window on top is new and seems incorrect.
What GPUs do you have? AMD? NVidia? I can show ya how to determine the HARDWARE order of your GPUs to determine the order to use for OC'ing.
I have a mix of Nvidia cards - 1050s, 1070s and 1080s. Thanks!
SSH into your rig using LAN Shell In A Box or other SSH utility. Logon with miner then enter this at the command line (press ENTER after typing or Copy+Paste'ing it):
cat /var/log/Xorg.0.log | grep "NVIDIA" | grep GPU
This will show you the number associated with your GPUs. These are the values you should use for overclocking in smOS, NOT the values presented by your miner itself. I think if you have an onboard GPU enabled and multi-GPU enabled in the BIOS, you may have to ignore the first entry ("GPU0") for OC'ing because that will be the onboard graphics card, but you should be able to quickly identify this situation.