Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux]

2 EVGA 780TI reference models with Skyn3t's bios. Per the other posts on this thread, iv tried many combos of C/H/m with T at 15x24 with no luck

-C 2 -H 1 -m 1 -l T15x24 runs at 20khs no matter what C/H/m is at

Best auto was T480x1 at 620khs

This new version doesn't work so well for me Sad

Try progressively lowering it from x24 down to 20 and maybe even lower, see if you get the best results with x20 as some of us do

Thank you sir, very kind of you to help. T15x16 is running at 685khs! Cheesy

cards running at 1188mhz, +105% Power Target, default voltage

So x16 gave you the best results? Or did you lower it to that at once instead of testing each 15x24-16? Would just like to know since it's so strange that people are getting extremely different results with the new kernel, with the old one it was very similar for everyone with the same settings if you had the same card and clockspeeds etc.

you have to display the autotune values and search for "bumps".
However the 15x24 problem is kind of funny. It works apparently for certain 780ti (EVGA sc) and not for other (EVGA ref.). may-be the driver version but 15x24 was not working for me with the previous driver version either