Vosk, what are the symptoms of the crash - does the miner lock up entirely, or does it just stop hashing (either on one board or all) ?
anyone have their g28 crash on groestl?
I have 15 G-28 and they randomly crash all the time. I cannot spend a day without having to manually unpower and power back at LEAST 6 unit as they do not cycle themselve upon a crash.
http://prntscr.com/llk8fihttp://prntscr.com/llk8ruhttp://prntscr.com/llk90pBaikal skype support has no idea what's up.
Oh, as some other said, got multiple board that were not in the right slot and bent. 1 unit wouldn't power up at all because one of the board was missing a capacitance and now only run with 6 instead of 7 board.
Seriously, never again will I purchase from Baikal unless they do something about this.
Has anyone found a fix for this? Two of my three G-28's crash atleast everyday while one of them seem to be able to go for a week or so. I am forced to power cycle them to get them to hash again, but about 50% of the time of when power cycling them they fail to boot up correctly and will not hash. This forces me to power cycle each machine sometimes multiple times in a row.
My solution to this was to put them on a switched PDU and/or smart outlets on a schedule to cycle every few hours; however half of the scheduled resets result in a non-hashing machine until the next scheduled reset (which is every 2-4 hours currently, I will have to adjust for more frequent resets however it seems they will still only correctly cycle about half the time.)
At this rate; since about 50% of my power cycles result in a non-functioning machine, the BK-G28's are effectively only hashing 50% of the time. This is catastrophic.
Anyone else with similar experiences?
one of my two G-28's crash atleast everyday like yours, I am always forced to power cycle them to get them to hash again.