bminer 1080ti 7.0-7.4 G/s   925mV ~ 180w.

If regulated through Pl. (75%) then the voltage per core is above 1000mV, then the video card does not work well. Lower consumption is higher hashrate, does not sound likely, but it is a fact! Deliver a fixed voltage of 925 mV and add overclock on the core, which would be about the same value as with 75% pl.


I compared the bminer and gminer on a grinmint bminer gives a larger hash, but a rather high percentage of rejects. The gminer gives a slightly smaller hash rate, but this is offset by the lack of rejects. It should be borne in mind that the gminer loads the processor more than the bminer. The next test that I’ll run is bminer on f2pool (bminer has fewer rejects on this bullet) and grinmint on gminer. 2 identical rig. I like both the miner and the competition between them.