Yeah, I just got my BJ yesterday, I had the same issue. The brand new shipped BJ just does not start up. I have confirmed Raspberry Pi is defective, cause the HDMI has no output to the monitor at all. Do you know how to diagnose the Baby Jet itself? After I plugged in power cord and turned on power switch on the power supply, nothing happened. I can see there is power switch and two LED lights on each side, but they are just dark, do you those two LED light are supposed to be on after the power supply is turned on? Thank you!
Please reload your SD card, that is all that's wrong with your Raspberry Pi. Note that the monitor will not show anything for about 3-4 minutes when first plugged in, as it must get the current software and install it first. Then, it will reboot and you should get a display on any HDMI monitor or TV.
Note that you do not need a monitor. The terminal screen is available from the web interface.
Here's the SD reload instructions:
http://hashfast.com/how-to-update-babyjets-raspberry-pi-sd-card-software/Please got here for setup instructions and to access your Miner's web interface after it updates (3-4 minutes):
http://setup.hashfast.com/Sorry for the trouble, but you should be able to get up and running within about 20 minutes total if you follow these instructions.
-Phil
Thank you Phil. Actually I did what the instruction says. The issue is that the LED indicator of the port on my switch does not even show the internet connection is every enabled on RB Pi. So I think it has no chance to download any uploads. Are you sure the reload can fix the NIC issue? Anyway, I am trying, will update soon. Thanks again!