1. awesome miner! thanks for the hard work.
I got an issue with minerrocks and turtle coin I want to bounce off you, So I have the config file set. When I run autostart with the filters I want It grabs 3 pools ( MSR/QRL/GRAFT ) and everything works fine. but TRTL ( turtlecoin ) pool isnt found on minerrocks. if I filter down to JUST TRTL coin. it returns "NO POOLS!"
I tried to get on a different pool using the start.bat and choosing manual coin mode. cryptoKnight shows turtlecoin but the algo is the old one so It doesnt work. turtlecoin forked to CN-trtl recently and cryptoKnight shows it as cnlitev7. so it never mines.
posted on minerrocks discord 1-29-19 "Turtlecoin will fork from 1,200,000 (in two days) to new POW - cn-trtl (
https://github.com/turtlecoin/turtlecoin/releases )
Please use trtlstak 2.7.3 (
https://github.com/turtlecoin/trtl-stak/releases ) and new ports: 5003, 5005, 5007.
Other ports will be closed during fork."
might need to add trtlstak 2.7.3 for good measure to the miners. but I have used xmrig ( command line only ) to mine it setting currency to turtlecoin
and suggestions as to whats going on, and why the minerrocks pool isnt linking? another note actually. if you try to just show a coin list for minerrocks, it shows NOTHING. where the cryptoKnight pool returns coins that match my config. where minerrocks wont ( even though MSR/QRL/GRAFT work )
also I thought I read on here you have a discord channel for this, can you link me?
**** I have been investigating a few things to see if I can figure this out. some other issues popped up ****
I found that the pool CryptoKnight has similar pools as minerrocks. so I wanted to verify on that pool, if turtle etc is working.
1. when I set mining mode to Automatic I get a response of "mining mode not available for this pool" - setting it to manual mode gets it going, but defeats the multipool idea.
2. in manual mode, I set the coin to turtle - it fails because the algorithm is setting as lite-v7 not cntrtl, this is on the JCP cpu miner, and xmrig. somewhere its defaulting to the old algo for turtle.
3. I have lethean coin - previously intensecoin - cryptoKnight has a pool for it, but it wont recognize it when I start the miner. lethean is Cnv8
just upgraded from 19.01-19.02 no change in any of this