Post
Topic
Board Hardware
Re: Official Thread: AMT
by
loshia
on 07/02/2014, 12:24:03 UTC
Unless you prefer eu based company technobit Wink I can assure all of you that I am having eight chip coincraft board in hand hashing like I beast 240-250 gh

And pulling around 3W/GH I believe, albeit overclocked, but without even accounting for the PSU inefficiency.
Based on the same chip, AMT are still claiming 0.5-0.75 W/GH at the wall, and thats up from their previous ludicrous claim of 0.25-0.5W/GH.

To quote AMTs favorite shill:
Yes, I do believe the  unit will produce up to 1.2THs, running around 600Watts.
Dirty lie dude it is same chip. If you wanna efficient miner go for bitfury miner or under lock coincraft. If they do something at all it will be a trade of between power and hashing rate.
The math is very simple dude
1. Chip supplier gives you a figure of power at one volt or whatever chip power is
2. The above figure is taken from simulations not real chips and differs with let say 10 % from reality. When chip is Overclocked the difference is quite big
3. Add at least 10% for cd/cd 12v to 1 and on top 15at least psu loss
There is one slight chance for them to meet their figures if they putt wise as much chips as planned and under clock them. It is too late to do the math right know but they will roughly loose 60 chips costing 100 used each to make it happen and so on and on
Again it will be not their fault the chip needs power that is all
And they are aware of the fact they speak nonces unless instead of 220/120 v in your plugs you happen to have ONE VOLT dc  Grin

It is likely the 1.2 THs units will be around 1.1 THs instead of the published.

Cointerra TerraMiner IV was advertised at 2 THs and only delivered like 1.8 THs.   A 10% drop from original estimates.  

This of course depends if the manufacturer fixes the design to add more chips.  Cointerra has much larger chips so it is unable to adjust the design,  however bitmine and AMT have a lot of smaller chips, so if they add 10% more, they can hit their targets.
Dude,

1.2THs, running around 600Watts.


If the quoted 600Wats are at the wall (220V better scenario) I can make 10 BTC bet that they  will not make it!!! never!
I am talking about mass shipped units. If they put 300 chips (instead of 40-50) undervolted and underclocked there is a slight chance this to happen. But they will not do it on production units for sure because this costs a lot of money!

Just find a reputable third party person like john to hold our coins

Who has the guts to earn some quick money Grin Anyone?

The best dreamed scenario will be arround 1.2 KW at the wall for 1.2T unit PERIOD!!!!!!!!