Re: arOpenCLMAX - MAX coin OpenCL miner - Works with AMD, NVIDIA XPT

is it possible to mine with sapphire radeon r9 280x Huh

im only mining with cpu and integrated gpu althought i have r9 280x connected Sad

Quote

New block data - height: 3394 tx count: 0
[00:14:13] kHash/s: 8421.18 Shares total: 2 / 2
[00:14:21] kHash/s: 8409.92 Shares total: 2 / 2
[00:14:29] kHash/s: 8383.78 Shares total: 2 / 2
New block data - height: 3395 tx count: 0
[00:14:37] kHash/s: 8371.87 Shares total: 2 / 2

what can i do
Huh

i am getting pennies with this hash rate Sad

anybody

please... i am getting only 8000kHash Sad

I'm running two 280x's no problems, what's your start.bat look like?

arOpenCLMAX -o http://ypool.net:8080 -u xxx.xxx -p x -d 0,1

Sad

i have got AMD Fusion A6 5400K Black Edition (integrated gpu). i hope that this integrated gpu is not causing problems Huh

i would like to mine with 280x not this shitty amd gpu Sad

any ideas what is wrong, please Huh

Ok, lose the port number - I'm not using one and it's working fine.

Secondly, what device number is your Sapphire?

Set your .bat to start only the Sapphire by device number.

Edit: Your .bat is asking for D1 and D0 to start, you should perhaps only have one device to start?

i have removed port number. How can i set .bat to start only the sapphire by device number?

is this correct ?

Quote

arOpenCLMAX -o http://ypool.net -u izyy2.max -p x -d 0

but the hash rate is still around 7000/7500khash Sad

Then try -d 1

I would guess that the onboard graphics would get the first device number, ie: d0

now i only get 50 khash Huh

Quote

Initializing GPU 1
Initializing Device: AMD A6-6400K APU with Radeon(tm) HD Graphics
Platform 00: AMD Accelerated Parallel Processing
Device 00: Tahiti
Device 01: AMD A6-6400K APU with Radeon(tm) HD Graphics
xptClient_addDeveloperFeeEntry(): Invalid checksum
Connected to server using x.pushthrough(xpt) protocol
xpt: Logged in with xxx.xxx
New block data - height: 3487 tx count: 0
[00:00:00] Start mining
[00:00:08] kHash/s: 0.00 Shares total: 0 / 0
[00:00:16] kHash/s: 32.77 Shares total: 0 / 0
[00:00:24] kHash/s: 43.69 Shares total: 0 / 0
[00:00:32] kHash/s: 49.15 Shares total: 0 / 0

Right, this is what I would do, but no guarantees are offered....... this is at your own risk.

I would uninstall drivers and SDK and use the ATI clean-up utility

Reboot.

Re-install drivers.

Reboot.

Re-install SDK.

Reboot.

Go to Device manager and disable the APU.

Reboot.

Try to mine again without specifying any device, hopefully the APU will be disabled and only your sapphire card will be seen.

I would imagine that there is some kind of conflict going on between the two graphics adapters.

If that doesn't work, well.......

thank you for your advice but unfortunately i cannot disable apu Sad

any other suggestions ? replacing cpu ? Undecided